MDS_PLMPA-4&PA4

Material Data Sheet

PLMPA-4 | PA4（PA6+40%GF）

General Information

PLMPA-4 (Polyamide 6 with 40% Glass fiber) is a high-performance engineering plastic material that combines high mechanical strength, stiffness and good dimensional stability.
The incorporation of glass fibers significantly improves wear and creep resistance and increases load-bearing capacity compared to unreinforced PA6. The material also provides good thermal stability and resistance to many lubricants and chemicals.

PLMPA-4 (PA4) is typically used for sliding and guide ring elements, wear and bearing bushes as well as wear-resistant components, where high strength and durability under mechanical stress are required.

Remark

All test methods and values mentioned above are corresponding to ASTM standards. The properties have been determined on standardized test specimen and can not be directly related to any component or finished item. All tests are made under laboratory conditions.

Suzhou Pulim Sealing Technology Co.,Ltd.

Address: No. 155 Huayang Road, Xiangcheng District, Suzhou, China, 215134 Phone: +86 512-66333588  Fax: +86 512-66333988                    Email: sales@pulim.cn     www.pulim.cn

• 

  MDS_PLMPA-4&PA4