Language

Home > Products > Raw Materials > MDS-PLMPUR&P1101
Products

MDS-PLMPUR&P1101

Material Data Sheet

PLMPUR | P1101TPU

General Information

PLMPUR is a thermoplastic polyurethane elastomer based on Polycaprolactone polyol.
The material shows excellent tensile properties and tear strength, low compression set as well as outstanding abrasion resistance.

PLMPUR is mainly used in seal applications with high demanding mechanical properties and wear resistance, in combination with a very good resistance against hydraulic fluids based on mineral oils. Furthermore the material shows good ozone and weather resistance.

Physical properties

Colour :

Green

Hardness :

DIN ISO 48-4 3 sec

Shore A

95 +/-2

Hardness :

DIN ISO 48-4 3 sec

Shore D

48 +/-3

Density :

DIN EN ISO 1183-1

g/cm3

1.18+/-0.02

100% Modulus :

DIN53504

N/mm2

12

Tensile strength :

DIN53504

N/mm2

48

Elongation at break

DIN53504

%

430

Tear strength :

DIN ISO 34-1

N/mm

110

*Compression set : 24h/70°C

DIN ISO 815

%

27

**Compression set : 24h/100°C

DIN ISO 815

%

33

Abrasion :

DIN ISO4649

mm3

18

Min.service temperature:

ISO 11357-2

°C

-30

Max.service temperature:

ISO 11357-2

°C

110

* 24 h 70°C 20% deflection/** 24 h 100°C 20% deflection

Remark

All test methods and values mentioned above are corresponding to ISO or DIN standards. The properties have been determined on standardized test specimen and can not be directly related to any component or finished item. All tests are made under laboratory conditions. The mentioned values are nominal values and must be fulfilled – considering related tolerances – for each material batch.

Suzhou Pulim Sealing Technology Co.,Ltd.

Address: No. 155 Huayang Road, Xiangcheng District, Suzhou, China, 215134 Phone: +86 512-66333588 Fax: +86 512-66333988Email: sales@pulim.cn www.pulim.cn